755T1=* Vacuum forming workstation with integrated tank

755T1=* Vacuum forming workstation with integrated tank
Reference number 755T1
A vacuum accumulator makes work easier.

The vacuum forming workstations with integrated tank consist of a series of compact vacuum forming tables, which can be equipped with up to 4 vacuum forming workstations. The highlight of this product series: an integrated tank in the upper part of the vacuum forming table’s frame. The tank temporarily stores a vacuum, so it is immediately available at the desired output level when required. 

  • The vacuum forming workstation is available with up to four vacuum forming workstations.
  • The vacuum is extracted using a foot-operated valve so you can control extraction precisely while keeping both hands free for vacuum forming and modelling.
  • And changing vacuum pipes is just as easy: It takes only a few steps to replace them with other adapters and suction pipes, such as the conical vacuum pipe (article number 755X230) or the vacuum forming adapter with vacuum forming plate (article number 755X180=R or 755X180=L).

 

755T1=* Vacuum forming workstation with integrated tank
Part Number 3C88-2
A vacuum accumulator makes work easier.

The vacuum forming workstations with integrated tank consist of a series of compact vacuum forming tables, which can be equipped with up to 4 vacuum forming workstations. The highlight of this product series: an integrated tank in the upper part of the vacuum forming table’s frame. The tank temporarily stores a vacuum, so it is immediately available at the desired output level when required. 

  • The vacuum forming workstation is available with up to four vacuum forming workstations.
  • The vacuum is extracted using a foot-operated valve so you can control extraction precisely while keeping both hands free for vacuum forming and modelling.
  • And changing vacuum pipes is just as easy: It takes only a few steps to replace them with other adapters and suction pipes, such as the conical vacuum pipe (article number 755X230) or the vacuum forming adapter with vacuum forming plate (article number 755X180=R or 755X180=L).

 

Product information

The vacuum forming workstation with integrated tank at a glance
Equipment Connection to a vacuum system, e.g. 755E80=* mobile vacuum pump with tank, tank integrated into the frame, 1x shelf with grate, 1x replaceable HPME shelf for cutting and adhesives work
Vacuum forming workstation Incl. vacuum pipes, water trap, vacuum pipe holder tilting by 90°, foot pedals to control the vacuum
Colour light grey [RAL 7035]
Material Steel
Vacuum connection diameter 25 mm, adapter for 13 mm
Type of Planning and Equipment Plastic Forming and Deep-Drawing
Notes recommended vacuum forming output 10 m³ per workstation
Model
755T1=2
755T1=2
755T1=* Vacuum forming workstation with integrated tank
755T1=3
755T1=4
755T1=4
Dimensions WxDxH 1,250 x 750 x 750 mm 1,750 x 750 x 750 mm 2,500 x 750 x 750 mm
Version 2 pc. vacuum forming workstations 3 pc. vacuum forming workstations 4 pc. vacuum forming workstations

Accessories


Similar products